Rose electronics CrystalView Plus Manual de Instruções descarregar pdf (Página 28)

TROUBLESHOOTING

CRYSTALVIEW PLUS USB INSTALLATION AND OPERATIONS MANUAL

Troubleshooting

The troubleshooting section is used as a guide to understanding the

capabilities of the CrystalView Plus USB and for general troubleshooting. If

you have any problems or questions concerning the installation, operation or

usage of the CrystalView Plus USB that is not covered in this manual,

please contact Rose Electronics for technical support.

Image is not sharp / smeared

 Improper video equalization adjustment.

 Check CATx cable connections.

 If you are using an LCD panel, adjust the panel’s clock and phase.

Separated colors / colored borders on text and Icons

 Improper skew settings, adjust color delays.

 Check CATx cable connections.

No video on remote monitor

 No power applied to local unit.

 Check USB connection on local unit, local unit power is obtained from

the CPU USB connection.

 CPUs USB port does not supply adequate power for the local unit, Use

an external 5V power adapter.

Monitor goes blank for a few seconds

 Check CATx cable routing to assure it is not routed near power lines or

other power sources that can cause interference.

 Check the system grounding.

Incorrect graphic mode on boot-up

 If the CPUs graphic card supports VESA DDC, configure the graphic

driver for the exact make and model of the video monitor.

 Transfer the monitor’s DDC information to the local unit.

Video is unstable / excess jitter

 If you are using an LCD panel, adjust the panel’s clock and phase.

 Power off and on the remote unit.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 39 40

Sem comentários

Rose electronics CrystalView Plus Manual de Instruções Página 28