Rose electronics MultiStation Manual de Instruções descarregar pdf (Página 10)

PANEL DESCRIPTION

MULTISTATION INSTALLATION AND OPERATIONS MANUAL

Front panel – model ML-2U

Figure 1. ML-2U Front Panel

Table 1. Front panel - model ML-2U

Dip Switch

Configuration

Enables commands from keyboard at each KVM station. Up is

enable, down is disable.

KVM1 – dip switch on the right

KVM2 – dip switch 2

position from right

Power LED

When lit indicates the unit is powered on. The power is controlled by

a switch on the rear panel and an external power transformer

adapter supplied with the unit.

Status LEDs

Flashes once a second to show unit is on-line. This model internally

consists of two boards. The one-second flashing indicates the

boards are communicating with one another. Also flashes when

keyboard or mouse activity occurs.

Remote Video

LED

When lit the CPU is sending video to KVM2

Keyboard-

video-mouse

(KVM)

connectors

Keyboard, video monitor, and mouse are connected at this port

using a keyboard-video-mouse adapter cable. The cable has a

DB25 male at one end and appropriate connectors at the other end,

depending upon your keyboard, video, and mouse type

Computer

connector

Your computer is connected at this port using a computer adapter

cable. The cable has a DB25 male at one end and appropriate

connectors at the other end, depending upon your keyboard, video,

and mouse type*

* See Appendix C for further cable information.

Dip Switch Remote Video LED

Status LEDs

Power LED KVM connectors Computer connector

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Sem comentários

Rose electronics MultiStation Manual de Instruções Página 10