Rose electronics UltraMatrix 8 Manual de Instruções descarregar pdf (Página 61)

ULTRAMATRIX E-SERIES MANUAL

Switching using the serial port

From any RS232 port on any switch, you can switch any KVM station in

the system to any computer. Connect a serial cable to the RS232 port

on any UltraMatrix and to the COM port on the standalone computer.

Start a communication program like HyperTerminal and connect to the

UltraMatrix by clicking on the “Call” ICON.

The input format to switch a KVM station to a computer is KnnnCxxxxS

[Enter] where nnn is the KVM number of the card desired (1 – 255) and

xxxx is the computer number to switch to (1 – 1000). For example, you

want to switch the KVM station on CPU card #4 to computer #50; the

command would be K4C50S [Enter]. The KVM station connected on

CPU card #4 would be switched to computer #50. The response on the

screen would be K4C50Rx, where x is one of the following status

values

1 = View

2 = Share

3 = Control

4 = Private

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 83 84

Sem comentários

Rose electronics UltraMatrix 8 Manual de Instruções Página 61