Rose electronics UC2-1x16U/E Manual de Instruções descarregar pdf (Página 28)

22 ULTRACONSOLE INSTALLATION AND OPERATIONS MANUAL

Configure KVM menu

Configure KVM

BUS

KVM name

Resolution

Start

User

KVM station 1

640x480@60

User 1

Name of keyboard-video-mouse station (KVM) up to 16 characters

Figure 8. Configure KVM menu

The “Configure KVM” menu allows you to change the KVM name, resolution, start, and user parameters. The ID

column indicates the physical location (port) the KVM is connected to. The BUS column is the KVM video bus

number. These values are not user changeable.

KVM name (Default: KVM Station 1)

To change the KVM name, select KVM from the main menu and press [Enter]. An input box will display to enter a

new KVM name. Type in a new name and press [Enter]. The KVM name can be 16 characters in length, case

sensitive.

Resolution (Default: 640x480@60Hz)

Selects the resolution and scan rate of the on-screen display when no attached computer video is present. If a

computer video is shown, the detected video resolution from the connected computer is used.

To change the resolution select the resolution field and press [Enter]. A list of supported resolutions will display.

Select the new resolution from the list and press [Enter]. The supported resolutions are:

 640x480@60Hz

 640x480@72Hz

 640x480@75Hz

 640x480@67Hz

 832x624@75Hz

 1152x900@66Hz

 1152x900@76Hz

Start (Default: 0)

Assigns the CPU port number the KVM station will connect to on start up and login. 0 = no connection. To change

the value, select it from the menu and press [Enter]. Type in the CPU port number the selected KVM station will

connect to upon start up or login and press [Enter].

User (Default: User 1)

This field is used to assign a specific user to the KVM station. To change the user, select the user field and press

[Enter]. A selection box will display a list of user names followed by “Login”. Select the user to assign to the selected

KVM station and press [Enter]. Use the page up/down keys to display more users. If “Login” is selected, the KVM

user must login with their user ID and assigned password to gain access to the KVM station.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 61 62

Sem comentários

Rose electronics UC2-1x16U/E Manual de Instruções Página 28