Rose electronics UC2-1x16U/E Manual de Instruções descarregar pdf (Página 44)

SERIAL DEVICE SUPPORT

38 ULTRACONSOLE INSTALLATION AND OPERATIONS MANUAL

Serial device support

The serial feature allows you to connect a KVM station to a serial device such as the serial port on a Unix or Sun

computer, a communication device, or any device with a serial port. The serial device is connected to the DB25F

CPU port on the UltraConsole with a serial cable (See Appendix C for serial cable part numbers). Any CPU port can

be configured to be a serial port. When you switch to that port, you are connected to the serial device and can

access it as you normally would.

To configure a CPU port for a serial application, call up the main menu ([Ctrl] – F12), and then select computer and

press [Enter]. From the configure computer menu, use the up/down arrow keys to select the desired computer to

configure for serial, then use the left arrow key and select the keyboard field for the selected computer and press

[Enter]. A selection box will display listing the supported choices. Use the up/down arrow keys and select the serial

baud rate to configure the CPU port for and press [Enter]. Save the changes to flash memory. Once saved, that

CPU port is configured for serial support.

(See Figure 21)

Configure Computer

Computer name

Keyboard

Mouse

Computer 1

PC2

PS/2

Computer 2

Serial 9600,N,8,1

Computer 3

PC2

PS/2

Computer 4

PC2

PS/2

Computer 5

PC2

PS/2

Computer 6

PC2

PS/2

Computer 7

PC2

PS/2

Computer 8

PC2

PS/2

Computer 9

PC2

PS/2

Computer 10

PC2

PS/2

Computer 11

PC2

PS/2

Computer 12

PC2

PS/2

Computer 13

PC2

PS/2

Computer 14

PC2

PS/2

Computer 15

PC2

PS/2

Computer 16

PC2

PS/2

Use page up and page down keys to configure more computers,

Type of computer, for PCs this is the computer’s keyboard mode

Figure 21. Serial support

Computer 2 is configured for serial support at 9600 baud.

With the CPU port configured for serial support and the appropriate serial cable connected, the KVM station can

access the connected serial device the same way you would access it using a computer terminal.

When you switch to a CPU port that is configured for serial support, the powerful OSD will emulate a VT220 terminal.

You can also use the KVM station in a standard TTY mode which will automatically scroll incoming data. The

example below shows a typical screen from a UNIX computer. The data is shown in a standard 24 x 80 area with

two status lines. The first line shows the current KVM station name, user name, connect mode, and computer name.

The second line shows the command functions available.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 61 62

Comentários a estes Manuais

Sem comentários

Rose electronics UC2-1x16U/E Manual de Instruções Página 44

Comentários a estes Manuais

Manuais e produtos relacionados com Interruptores KVM Rose electronics UC2-1x16U/E