Rose electronics UC2-1x16U/E Manual de Instruções descarregar pdf (Página 41)

ULTRACONSOLE INSTALLATION AND OPERATIONS MANUAL 35

Figure 20. Serial menu

Serial menu options

Option 3, 4 and 5 are not available when using a display terminal.

Option 1. Change Starting Computer (From card #1 only)

Select this option to change the starting computer number. To change the current value press 1; a prompt will

display, as shown below. Type in the new starting computer number and press [Enter].

The serial option menu will display again. Select Option 7 to save the new starting computer number to flash

memory. Cycle power on the UltraConsole switch to distribute the new value to all the other CPU cards in this

switch.

Option 2. Change the serial port baud rate

Select this option to change the baud rate on the serial ports of the UltraConsole switch. The serial ports can be set

to either 9600 or 57,600 (bps). The option menu shows the current serial port setting. To change this from current

setting press 2. The message below will appear.

You must change or verify that the computer’s baud rate matches the UltraConsole baud rate. If you are using

Windows HyperTerminal on your computer, first disconnect from the UltraConsole switch by clicking on the

HyperTerminal disconnect ICON. Change the baud rate to match the UltraConsole switch’s baud rate, then connect

to the UltraConsole switch by clicking on the call ICON. Press [Enter] and the serial menu should display in the

HyperTerminal window.

UC Serial option - HyperTerminal

Serial options menu

Change starting computer number … 1

Change the serial port baud rate … 9600

Receive new main program or kernel from serial port (this card only)

Send this unit’s main program to other units

Send this unit’s kernel to other units

Reset configuration data to factory defaults (this card only)

Save changes made in 1 and 2 (this card only)

Exit (restart the unit)

Enter choice

- - >

File Edit View Call Transfer Help

Connected 0:03:00 Auto detect 9600 8-N-1 Scroll CAPS NUv Capture Print echo

Enter the starting CPU number

Baud rate changed to 9600 (or 57,600)

Set baud rate of your terminal to 9600 (or 57.600) and press return.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 61 62

Sem comentários

Rose electronics UC2-1x16U/E Manual de Instruções Página 41